X’traseal x’bond Construction Adhesive Sealant
X’traseal x’bond Construction Adhesive Sealant is formulated to eliminated much of the nailing required for construction purposes. This adhesive sealant provides a high strength, water resistant bond for a wide variety of construction materials including wood, plaster wood, mirror, masonry, aluminum, galvanized iron, steel, concrete, fabric cement sheeting, wall and floor paneling. Most suitable for use on foamed polystyrene and mirror backed tiles.
APPLICATION INSTRUCTIONS:
X’bond construction adhesive can be applied either by 1-way wet stick adhesive method or 2- way contact method. In both cases the first requirement is that both surfaces to be bond must be clean, dry and free of grease, oil and dust. Any loose or flaking paint must be removed and lightly sand before application.
1-WAY WET STICK ADHESIVE METHOD:
RECOMMENDED FOR HEAVIER PANELS.
Apply 4-6mm bead adhesive to one surface, beads should not be 45mm apart and butt joint should be adhered on both surfaces. Bringing substrate together with clamped, nailed or screwed to maintain maximum surface contact at bonded interface. Clean off excess adhesive with toluene or xylene. Temperary fastening can be release after 24 hours. For flooring application, the adhesive should be applied to the flooring manufacturer’s specifications. To stop floor squeaking, apply a bead of adhes
