KG Skim Finish (White / Grey)

Premium quality polymer modified cementitious finish top coat provides superior bonding onto internal base coat and render coat to give a fine and smooth finishing before painting work.

SURFACE FOR USE

Surfaces to be plastered must be sound, clean and free from any contamination materials. Wet surface before application if it is extremely hot and dry.

MIXING

Mix the product thoroughly with approximately 40% by weight of clean water using an electric mixer with attached stirrer for 3 – 5 minutes until a homogeneous mix that is free from lumps.

APPLICATION

Apply on the surface manually using steel trowel/ spatula or using spray plastering machine.

FIRE RESISTANCE

This product is non-combustible.

SAFETY PRECAUTION

This product contains cement additives and may cause irritation when in contact with skin or eyes. In case of any contact, wash thoroughly with clean water. If irritation persists, seek immediate medical attention.

DISCLAIMER: All information contained herein is only intended to give a fair description of the products and their capabilities under such specific test conditions. However, it does not constitute an offer of warranty by the manufacturer nor a guarantee of its accuracy or completeness in describing the performance or suitability of the various products.